Close

Front linkage accessories, tools and attachments from Zuidberg are designed to further enhance the performance of your Zuidberg front linkage and/or PTO. There’s a wide range to choose from and, as you’d expect, they fit together perfectly!  Adding a Weight Carrier, ECO-Twin PTO, Accumulator and Pressure Gauge, Easy Float or Front Remote Controls for example, can significantly increase the reliability, ease and efficiency of your work.

WEIGHT CARRIER

WEIGHT CARRIER

Zuidberg’s three-point weight carrier is specially developed for mounting the basic weight of the tractor, which is removed when mounting the front linkage. The weight carrier is tractor-specific, so a perfect, snug fit is guaranteed. Depending on the tractor type, the weight to be added to the weight carrier can range between 700 and 1600kg.

Key Features

  • Tractor-specific design for a perfect fit
  • Weight to be added from 700 to 1600kg
  • Three-point absorption for the tractor’s basic weight
ECO-TWIN PTO

ECO-TWIN PTO

Current tractors can supply the same power even at a lower rpm. The ECO-TWIN front PTO enables you to switch between ‘normal transmission’ and ‘eco-transmission’ from the cabin, allowing the engine speed to be reduced to approximately 1600 rpm. You can choose between two speeds for the PTO:

  • 1000E rpm saves up to 20% in fuel
  • 1000 rpm provides maximum engine power
ELECTRONIC FRONTLIFT CONTROL (EFC)

ELECTRONIC FRONTLIFT CONTROL (EFC)

With EFC you can set any desired value, making the control of your front linkage and front PTO more efficient, more comfortable and safer. EFC can be used on tractors with both electrical and mechanical valves. Features include:

  • Adjustable lifting and lowering speeds
  • Adjustable height and depth limiters
  • Adjustable automatic switching of the front PTO
  • Hotkeys for lifting and lowering
7-POLE CONNECTOR

7-POLE CONNECTOR

The 7-pole connector gives you the option of electrically connecting the tractor and equipment. The set is supplied complete for mounting to the front of the front linkage. Among other things, the 7-pole connector can supply electricity to:

  • Lighting
  • Indicators
  • Number plate holder
  • Electrical components on equipment
  • Sensors for precision farming purposes
CHAIN HANGERS

CHAIN HANGERS

The chain hook set holds chains or springs that are used to reduce the load on front equipment. The chain hooks offer various options for attaching the chains or springs and are mounted at the right height and width to optimise the load reduction on the equipment. The chain hook set may include the following smart features:

  • Design matching the tractor, bonnet or front linkage
  • Easy access of lubrication points is maintained
  • Uninterrupted beams of the headlights are retained
  • Extra high chain hooks for tractors that are frequently used on hilly terrain
FRONT DOUBLE ACTING SERVICE LINES

FRONT DOUBLE ACTING SERVICE LINES

The front hydraulic system offers the possibility to hydraulically operate equipment. A Zuidberg front linkage is often predesigned for mounting one or more front hydraulics sets for optimum integration in the top plate.

Customised front hydraulics:

  • Hydraulic hoses at the correct length
  • Banjo eye and nipple connection for easy mounting
  • Quick release with dust cover
  • Supplied ready for use
DIN MOUNTING PLATE

DIN MOUNTING PLATE

The DIN plate and connection set offers rapid adjustment of a front linkage to a short mounted DIN plate. The short mounting directly to the lifting frame provides increased stability and a solid construction. In addition, the space for the PTO maintains the option to drive equipment and, due to its use in the front linkage, a lifting mechanism on the equipment itself is no longer required. The Zuidberg DIN plate is constructed in accordance with the DIN standard, and fits almost all Zuidberg front linkages that have a cast-iron lifting frame. Various versions are available, including:

  • Communal plate, CAT A/B/F1/F2
  • Communal plate, CAT F2
  • Connection set for front linkages of 13 to 50 kN
EASY FLOAT

EASY FLOAT

This module features a sliding-scale of pressure relief, guaranteeing perfect ground contour following and reduced ground pressure from the equipment on the front linkage. This prevents wear of the equipment and saves fuel due to the lower friction. Easy Float can be used on tractors with both electrical and mechanical valves. Features include:

  • Manually adjustable from outside the cabin
  • Automatic pressure monitoring with adjustment available
  • Can be (de)activated from the cabin
ACCUMULATOR AND PRESSURE GAUGE

ACCUMULATOR AND PRESSURE GAUGE

This option offers additional protection to the tractor, equipment and front linkage. The Accumulator absorbs peak loads, resulting in increased comfort levels and a prolonged service life of the tractor and equipment.

  • Prevents jumpy road behaviour
  • Optimum driving comfort
  • Equipment loading and unloading possible
FRONT REMOTE CONTROL

FRONT REMOTE CONTROL

If you’d like to be able to operate the front linkage from outside the cabin, for example, when hooking up and disconnecting equipment, the front remote control system is a great option. The system is available in various versions and sizes, so please ask your dealer for more details.

  • Front linkage control with a height limiter
  • Front linkage control with adjustable lifting and lowering speeds
  • Control additional hydraulic functions outside the cabin

 

The above is just a selection from an extensive range of tools and accessories which also includes a universal lamp set, adjustable height/depth limiter, tractor “A” frame, and lowering speed control set.

Lynx engineering - www.facebook.com/Everythingbutthetractor/

Yesterday we supplied and fitted this 4220 Fastrac with a colour matched Stoll FZ 60. This looks absolutely stella and we hope the customer enjoys it 😊 Give us a call for your next loader! #everythingbutthetractor #whatadifferenceadavemakes #jcb #stollfrontloader #ukagriculture G & J Peck Ltd JCB Agriculture STOLL Frontloader  

Lynx engineering - @Lynxengineering

Just another week with Lynx. Fitting Deutz Fahr 6165 ttv, John Deere 6195R, Case Magnum, New… https://www.instagram.com/p/BcaAbA7Hmtt/

FOLLOW US